PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : 1987 Motor in 1997 fahrwerk



sun_rat
24.08.2006, 19:28
ich haben plaziert fahrad in fahrwerk.

das drei haupt riegel das schleisst unterboden von fahrrad zu fahrwerk alle montieren serh gut.

das spitze lasche das montieren spitze von fahrrad zu fahrwerk unter gasbehalter montieren nicht serh gut.

hinter riegel das montieren zu lasche unter norm batterie gehause montieren nicht.

musst sorge ich das vier riegel nur montieren fahrrad zu fahrwerk?


gruss,
sun rat

PS. babelfish machen nicht das sprachubersetzung. entschuldigen. miene deutsch noch saugt.

Lotzbub
24.08.2006, 20:55
die motorhalter sollen alle fest am rahmen sein


Fahrrad = Motor ;D bubblefish = shit


Motor= engine

stefan

sun_rat
24.08.2006, 21:19
etwa ich fotografieren erkfaren besser.

:(


gruss,
sun rat

Lotzbub
24.08.2006, 21:23
yes, do it ;D

Secretwish
24.08.2006, 21:26
d. h. also Fahrrad = Engine ::)

fuck of bublefish ;D ;D ;D

Sigrid

sun_rat
24.08.2006, 21:26
been trying very hard to speak german better. now my english is all messed up.

;D


gruss
sun rat

Ritch
24.08.2006, 21:28
@ Sun Rat

better u write down your questions in english..

think your english is better for us to understand, like these fu..... babelfish german translation.. ;D ;D

anyhow .. pictures are the best ;D ;D

regards

Ritch

sun_rat
24.08.2006, 21:43
ok. in english.

ich haben plaziert fahrad in fahrwerk.

i have installed the motor in the frame.

das drei haupt riegel das schleisst unterboden von fahrrad zu fahrwerk alle montieren serh gut.

the three main bolts that connect the underside of the frame to the engine fit very good.

das spitze lasche das montieren spitze von fahrrad zu fahrwerk unter gasbehalter montieren nicht serh gut.

the bracket that connects the top of the engine to the frame under the gas tank does not fit perfectly.

hinter riegel das montieren zu lasche unter norm batterie gehause montieren nicht.

the rear bolt that connects to the bracket that is under the battery box doesn't fit at all.

musst sorge ich das vier riegel nur montieren fahrrad zu fahrwerk?

do i need to be worried that only four bolts connect the engine to the frame?

gruss,
sun rat

blue-thumper
24.08.2006, 22:03
sun-rat which is your problem? however, the motors of both years of construction are absolutely same from the design.

sun_rat
24.08.2006, 22:37
sun-rat which is your problem? however, the motors of both years of construction are absolutely same from the design.

that is what i understood too. but the motor does not fit the same.

i'll take pictures tonight when i go home, and post them tomorrow when i am back at work.

it is 3:36pm here.

blue-thumper
24.08.2006, 23:01
yes does photos. on Sunday if I am from dam back, I look at the pictures.

blue-thumper
25.08.2006, 00:49
das spitze lasche das montieren spitze von fahrrad zu fahrwerk unter gasbehalter montieren nicht serh gut.

the bracket that connects the top of the engine to the frame under the gas tank does not fit perfectly.


jo pustekuchen, das verstehe ich nicht weil ich nur ein ganz klein wenig englisch spreche.

(yes blowing cockie, this kann i not unterstand my english is so litle wie i self.)

gruß norbert ;D

Drachenreiter
25.08.2006, 01:16
Naja, an der oberen Motorhalterung passts halt nicht so richtig.

Leo
25.08.2006, 08:47
Hi sun_rat,

probably you try to fit the bracket in the top of engine in the wrong way. Change the right with the left side or twist them. For the next time you will take pictures before strip ;)
... maybe the engine is not in the right position - do you have a stand under the frame? - so the stand can (not must) push the engine into another level.

regards Leo

sun_rat
25.08.2006, 18:48
i took pictures, but then this morning left my camera at home, along with my breakfast. i will post pictures monday.

der_Thomas
27.08.2006, 17:28
We'll get it into the frame - if necessary with violence ;D

nice evening,
Thomas

Winter-ist-doof
27.08.2006, 19:43
meine Deutsch saugt sehr..

:D ;D :D ;D ;D ;D :D :D ;D :D ;D :D ;D :D ;D :D :D :D ;D ;D :D ;D :D ;D :D ;D ;D ;D :D ;D :D ;D :D :D :D ;D :D ;D :D ;D ;D ;D :D ;D :D ;D :D :D :D ;D :D ;D :D ;D ;D ;D :D ;D :D ;D :D ;D

8)

Babelfish saugt auch sehr.

Or for our english-speaking friends: BABELFISH SUCKS !!!! ;)

Kropatchek
28.08.2006, 14:40
If it does not fit - take a bigger hammer.

Hguss
Kropatchek 8)

sun_rat
30.08.2006, 20:40
miene fotos.

rear bracket does not fit this bolting place (http://i23.photobucket.com/albums/b359/batchfile/ode%20to%20jack/DSC01023.jpg)

top bracket held by two not three bolts (http://i23.photobucket.com/albums/b359/batchfile/ode%20to%20jack/DSC01021.jpg)

Kropatchek
02.09.2006, 12:49
miene fotos.

rear bracket does not fit this bolting place (http://i23.photobucket.com/albums/b359/batchfile/ode%20to%20jack/DSC01023.jpg)
There's a 2 piece bracket missing. Maybe you left it to the underside of the battery box.

top bracket held by two not three bolts (http://i23.photobucket.com/albums/b359/batchfile/ode%20to%20jack/DSC01021.jpg)
Move the engine to insert the 3rd bolt
Ther


Grusse
Kropatchek

sun_rat
06.09.2006, 18:19
the two peice bracket won't fit so the bolt fits through the engine mount. and the stock battery box is not part of the bike anymore since i made a new one.

i can't move the engine any more so the other bolt hole fits. i have it solidly set in the frame with the lower three bolts.

i will ride it as it is and if the engine falls out, then i will fly you out to help me put it back in with your hammer. :D


gruss,
sun rat

IN22
06.09.2006, 18:33
Hello san_rat

downloads the "Motofiches" to you from the download area.
on the page 42 you find in the middel of the picture (divides 4.5) the rear engine fixtures in your pictures are absent.

Gruß Ingo

Leo
07.09.2006, 08:39
Hi sun_rat,

the engine must be push forward. So the 3rd top-bolt will be fit. I can't understand " can't move the engine any more so the other bolt hole fits" - it must! Maybe you must put out the engine again and try it new. Look at the thread before from "IN22" - the rear engine fit is necessary for the right funktion.

Ciao Leo
e.g....please clean your bike ;D

sun_rat
07.09.2006, 16:16
e.g....please clean your bike ;D

was ist das "clean" du sprechen?


:P

Lotzbub
07.09.2006, 16:52
mach dein motorrad sauber ;D

sun_rat
07.09.2006, 18:53
mach dein motorrad sauber ;D

flat black rat (http://i23.photobucket.com/albums/b359/batchfile/ode%20to%20jack/flatblack.jpg)

nien. das nur wasser das berurht miene motorrad, es das was falle von der himmel.
miene motorrad ist fur reiten, ansehen nicht.

no. the only water that touches my bike is that which falls from the sky.
my bike is to ride, not to look at.

Leo
08.09.2006, 08:47
@Sun_rat

now your nickname is confirmed ;) and Texas has a lot of sun - less rain 8)

Leo's flat black fat

Ciao Leo

sun_rat
08.09.2006, 17:32
@leo

sehr schon!



gruss,
sun rat